For pre-positioned installation, the positions of the boreholes must be very precise, since the through holes are specified in the add-on part. Although this takes more time, cost-effective series assembly is possible because all boreholes can be made without interruption. In addition, the contractor has space to measure the borehole and set the anchor, since the add-on part only follows after the preparatory work has been completed. This means that very sensitive add-on parts can be stored in a protected location until they are installed.
 

In-place installation

This assembly process also consists of several steps, some of which are similar to pre-positioned installation:

​​​​​​​First, the borehole must be drilled. In the case of push through installation, the add-on part is an excellent plate drill jig. It is positioned first to create the drill holes accurately. (1) Now a hole is drilled according to the product data and cleaned using a cleaning brush and blow-out pump. (2-4) The anchor is then installed in the surface through the add-on part using a hammer. This is why we call this push through installation. (5) Finally, the nut must be tightened to the specified assembly torque. (6)
EJOT-Schwerlastanker-Ratgeber-Montagearten-Durchsteckmontage.jpg
To cover a wide range of applications, there are anchors with different head styles. The setting depth marking on the anchors from EJOT considerably reduces the measuring effort for drilling and driving in. It is therefore important to ensure that it remains visible despite the add-on part. Otherwise, the correct setting depth must be marked on the anchor by the technician. But this takes time.

​​​​​​​In the case of multi-part anchors such as our LIEBIG® SUPERPLUS BLS, both the threaded rod and the steel sleeve run through the add-on part, whereby very high lateral load-carrying capacities are achieved.